Flairmet logo

QUOTATION REQUEST - GATES, RAILINGS & BALCONY RAILINGS

For a free quotation for a quality steel (wrought iron style) gate, railings or balcony railings, please complete the following form and submit it electronically, fax or mail it to us. We will endeavour to provide you a quotation within 2 to 3 working days from receipt. There is a wide range of variations available, and if you don't see the design you require we will be pleased to quote for your specific requirements. For automated gates, please provide details of the gates required using the form below and we will contact you to discuss the automation requirements.

All gates and railings are hand made of quality steel and there are a variety of finishes available. The gauge of steel used is designed to give a quality look and feel and appropriately strong fixing points should be used.

If you prefer to complete a quotation request off line and fax or mail it to us, you can download a form for this by clicking here.

QUOTATION REQUEST
Flairmet logo
Flairmet Limited
Ladfordfields Industrial Park
Woodseaves Road
Seighford
Stafford
Staffordshire
England, UK
ST18 9QE
To: Flairmet Limited
Fax +44 (0)1785 282626


Tel. +44 (0) 1785 282301
e-mail: Flairmet@weathervane.uk.com
Internet site: http://www.weathervane.uk.com/acatalog/

Quotations will be provided in accordance with Flairmet's terms and conditions.
A. CONTACT DETAILS
Name
Address (number and street)
Village/district
City
County/state
Postcode
Country

Note: shipping of large gates and railings is normally prohibitively expensive outside the United Kingdom.
Delivery address if different
Number and street
Village and district
City
County/State
Postcode
Country
Leave blank unless delivery address is different from above
Telephone number
Mobile number
Fax number
E-mail: please type carefully: Email:
Delivery time requested
B. DETAILS OF GATE/RAILINGS REQUIRED For specifications of steel used browse here
Type of gate or railings To see the selection browse here
Shape of gate/railings To see the selection browse here
Railings: is a handrail required?
Railings: are bolting plates required (suitable for fastening to a wall or balcony)?:
Design
(Note: all designs are available as single/double gates, railings or balconies, even if pictured as only one of these)
To see the selection browse here
Do you want standard or superior weight (where available for the chosen design)? Standard bar is 12mm square, Superior is 16mm square with appropriately higher gauge railheads, posts etc.
Finish of gate/railings
Other:
For details of finishes browse here. Other colours may be available on request.
Note: All measurements should be given assuming the view from the road - see diagram opposite. Diagram of measurement for gate opening
Measurements in
Opening distance (width) of gate/railing
(Measure wall to wall)
metres/ft cm/inches
Top m/ft cm/ins
Bottom (if different) m/ft cm/ins
Please enter numbers only in these boxes
Height
If archway, specify height to top of arch
If design includes railheads, specify height including railheads
metres/ft cm/inches
m/ft cm/ins
Please enter numbers only in these boxes
Railheads (finials)
For gates/railings including railheads (finials), specify which design you would prefer.
To see the selection browse here.
The number of railheads depends upon the design and dimensions of the gate/railing. The size will be selected to suit the gate/railing, unless specifically requested.
Finish of railheads:
Archway only: Height of shoulder of semi-arch measured from the ground to the bottom of the arch.
metres/ft cm/inches
m/ft cm/ins
Please enter numbers only in these boxes
Single gate only: on which side do you want the gate hinges? Viewed from the road.
Double gate only: on which side do you want the latch? Viewed from the road.
Is the ground level?
If not level provide details (e.g. rises up to left by x degrees)

Viewed from the road.
Please draw an aerial (plan) view diagram of site where gate(s)/railings are to be fitted. Indicate where gate(s)/railings are to go, and the direction in which they are to open. If near the side of a building, please indicate distance to edge. Note: when all questions have been answered the form can be printed out before it is submitted electronically. This sketch can then be completed and the form faxed to us. If you have a scanner you can submit the drawing by e-mail. We can provide an indicative quotation without this sketch. Aerial (plan) view of installation site
State how aerial view is to be sent:
Please send a photo of the site if possible - we can provide an indicative quotation without this and you can send it when you decide to proceed. Note: if you have access to a scanner we can receive photo's electronically in all main formats - JPG, PSP, TIF etc. Send picture by e-mail to: Flairmet@weathervane.uk.com or include the picture with your fax if possible. State how the photograph is to be sent:
C. FIXINGS
Wall fittings required? Normally included as standard.
End post(s) required?
Please note: gates/railings will be made to fit between end posts, not behind or in front unless otherwise specified.

Note: for railings posts will be required approximately every 2 metres, depending on the height and weight of the railings. Our quotation will include these intermediate posts as standard; please indicate above whether or not you need posts at one or both ends of the railing length.
If posts required: height of post(s)
metres/ft cm/inches
m/ft cm/ins
The width and depth of the posts will be selected to suit the size of gates or railings.
Please enter numbers only in these boxes
Top of posts required For standard tops of posts browse here. Size will be chosen to match post type.

Other:
Where not flat, finish of post tops:
If post(s) exist please specify material of post
Where post(s) exist are they stable and in good condition?
D. LOCKS Note: all gates come with padlockable latches.
Do you require a key-operated lock? Triple throw locks are supplied with three keys. Cost: £100 each (fitted to the gate). For multiple installations can be supplied key-alike. See picture of lock with knob. We do not recommend this type of lock as a means of securing wide gates. We will be happy to recommend suitable security arrangements for specific circumstances or to work with your security consultants.
E. HANDLES Note: all gates come with latches unless a handle or knob is ordered as an optional extra
Do you require knobs or workable handle(s)? Knobs or handles are £12 per gate fitted (for both sides of one gate). To be workable, knobs and handles must be supplied also with a lock (see above). See picture of knobs and handles.
F. INSTALLATION (where applicable)
Note: we can only install in certain areas in the UK and quotations are given on the basis that the information provided is correct and complete. We reserve the right to charge extra should any difficulties arise due to adverse site conditions not fully disclosed to us in advance. Time for delivery and installation is approximate, as this can depend on work schedules.
Is installation requested?
If so, please answer the following questions:

Subject to confirmation, installation is available in Bedfordshire, Berkshire, Buckinghamshire, Cambridgeshire, Cheshire, Cleveland, Derbyshire, County Durham, East Sussex, Essex, Greater Manchester, Hampshire, Hertfordshire, Kent, Lancashire, London, Northamptonshire, Oxfordshire, Shropshire, Staffordshire, Suffolk, Surrey, Tyne & Wear, Warwickshire, West Midlands, West Sussex, Worcestershire, and other areas by arrangement. Contact Flairmet for details.
Specify ground material
Specify material of wall(s) or existing posts
Is wall material/existing posts in good condition and suitable for fixing gate/railings to?
Details if answer is "No":
Are there any underground services (e.g. gas or water pipes)?
Details if answer is "Yes":
Are there any obstacles or obstructions in the area where the gate(s)/railings are to be fitted or in the gate opening area?
Details if answer is "Yes":
Are there any other factors which may affect the installation - eg difficult to park or gain access?
Details if answer is "Yes":
G. Any other comments or requests? If you want more than one of the same design select the quantity required here:
If you want different designs please input them here:

How did you find our web site?
Other source/more details:
Signature (if sending by fax or mail)
Date

When you have completed the form we recommend that you print it out for your records.

Please also complete the sketch of the aerial view in black ink and e-mail or fax or mail a copy of this and, if possible, a photograph of the site (both marked with your name, e-mail address and telephone number), to Flairmet at:

Fax (from the UK): 01785 282301 or

Fax (internationally): +44 1785 282301


COUNTER

Back to Home

Copyright © 2002 Flairmet Ltd.

Contents of this site

Home page Garden Products Hanging baskets Wall baskets Patio baskets Brackets Garden furniture Christmas tree stands
  Fixings Weather vanes Gates & railings Rose arches & gazebos Commercial planters Fabrication services Wrought iron services Design to order
Contact Flairmet About Flairmet How to order Specifications and Terms Useful links Site map    

Flairmet's shops

Wrought iron shop Furniture Shop Weathervane shop Gates & railings shop Rose arches shop      

All designs are Copyright © Flairmet 1986 to 2004

Flairmet@weathervane.uk.com; Tel +44 (0)1785 282301; Fax +44 (0)1785 282626

Flairmet Ltd, 10-12 Ladfordfields Industrial Park, Seighford, Stafford, ST18 9QE, England, UK